|Place of Origin:||Sichuan, China (Mainland)|
|Minimum Order Quantity:||1 Set/Sets|
|Packaging Details:||Wood box|
|Payment Terms:||L/C, T/T|
|Supply Ability:||30 Set/Sets per Month|
|Rated Power:||20KW-250KW||Generator Type:||Synchronous AC 3 Phase Alternator|
|Frequency:||50Hz/60Hz||Rated Rotated Speed(r/m):||750-1000rpm/min|
|Insulation Class:||F/F||Keyword:||Pelton Turbine|
micro water turbine generator,
small hydro turbine generator
The High Head Can Control Flow With Single Nozzle And Dual Nozzle 20kw - 250kw Pelton Turbine For Hydro Power Plant
Our main products included:
1. Kaplan turbine generators series.
2. Turgo turbine generators series.
3. Tubular turbine generators series.
4. Francis turbine generators series.
5. Pelton turbine generators series.
After the introduction of the Pelton turbine, a vertical multi-jet Pelton turbine was developed to improve its efficiency and output power.
At this stage, with the application of new materials and new technologies, it has been able to manufacture high-head-high-impact Pelton
turbines with a water head of 1000-2000 m and an output power of up to 1000 MW, which is safe and reliable. The runner of the Pelton
turbine is a casting, so the casting quality of the runner is improved, and in the case where the casting of the large runner is difficult, the impact-type turbine runner which can be safely used for the high-head large-output power station is produced by the casting welding process. One of the development trends.
1. suitable for high head,small flow and flow changes in large runoff hydropower station.
2. With the power plant investment is small,compact units structure characteristics.
3. Has the efficiency changes smoothly,operating a wide range,even in the 15--20% load is reduced efficiency.
4. Suitable for high head,small flow station in mountainous area.
5. A unit construction,simple restrictions without cavitation condition,the advantages of stable operation,less investment,construction area.
|CJ237-W-55/1x6 Hydro Tubine Performance Data And Supporting Table|
|Model||Turbine Parameters||Generator Parameters||Driving mode||Speed Way||Water Intake|
|Design head(m)||Under the design head||Design speed (r/min)||The power of generator||Rated speed(r/min)||Runaway speed(r/min)||Vavel control||Guide vane control||Diameter (mm)|
|Flow rate (m3/s)||The output(kw)|
|CJ237-W-55/1x6||50||0.086||34.2||477||26||1000||1800||Between the united||manually||YTT-35||250|
|60||0.095||45||533||40||1000||1800||Between the united||manually||YTT-35||250|
|70||0.102||56.8||576||55||600||1320||Between the united||manually||YTT-35||250|
|80||0.109||69.4||615||55||600||1320||Between the united||manually||YTT-35||250|
|90||0.116||81.7||655||75||600||1320||Between the united||manually||YTT-35||250|
|100||0.122||96.5||685||100||750||1650||Between the united||manually||YTT-35||250|
|1 10||0.128||112||720||100||750||1650||Between the united||manually||YTT-35||250|
|120||0.133||127||750||125||750||1650||Between the united||manually||YTT-35||250|
|130||0.139||142||785||125||750||1650||Between the united||manually||YTT-35||250|
|140||0.144||158||805||160||750||1350||Between the united||manually||YTT-35||250|
|150||0.149||174||835||160||750||1350||Between the united||manually||YTT-35||250|
|160||0.154||190||866||160||750||1350||Between the united||manually||YTT-35||250|
|170||0.159||212||890||200||1000||1800||Between the united||manually||YTT-35||250|
|180||0.163||232||920||200||1000||1800||Between the united||manually||YTT-35||250|
|190||0.167||253||947||250||1000||1800||Between the united||manually||YTT-35||250|
|200||0.172||275||970||250||1000||1800||Between the united||manually||YTT-35||250|
|210||0.176||296||992||250||1000||1800||Between the united||manually||YTT-35||250|
Q1, Which turbine should I choose?
Please tell me the water head, flow rate, frequency, Total power you need
, voltage, on grid or off grid operation, we will propose a solution.
Q2, Can your factory provide all the equipment for hydropower generation?
Yes, we can provide you with turbines, hydro-generators, pressure regulators, turbine wheels, control panels, transformers, monitoring systems and more.
Q3, Can you do EPC for a hydroelectric power plant?
Yes, we can provide TURN-KEY and EPC services including measurement, design, manufacturing, construction, manufacturing, commissioning, inspection, maintenance runner replacement and refurbishment/upgrade/improvement/repair/refurbishment of turbines/generators including bearings, seals For parts and key parts, we will send technicians and workers to install equipment.
Q4,Is your company a trading company or a manufacturer?
We are a manufacturer of hydro turbine generators and started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.
Q5, What is an acceptable MOQ?
For this product, our acceptable MOQ is 1 set.
Q6,How long is the delivery time?
Delivery times range from 15 days to 6 months depending on the model you are purchasing.
Q7,Does your company have its own independent official website?
Of course, and we can see more information about our company and products on our official website.
website address: www.fstgenerator.com