|Place of Origin:||Sichuan China|
|Minimum Order Quantity:||1 Set|
|Packaging Details:||Wooden Box|
|Delivery Time:||90 Days|
|Payment Terms:||L/C, D/A, D/P, T/T, Western Union, MoneyGram|
|Supply Ability:||20 Sets Per Month|
|Design Head:||160-250 M||Flow Rate:||0.42-0.52 M3/s|
|Speed Range:||750-1000 R/min||Frequency:||50hz/60hz|
|Blade Material:||Stainless Steel||Color:||Customer's Requirements|
|Generator Phase Number:||3 Phase||Connection Method:||Straight League|
60HZ Hydraulic Turgo Turbine Generator,
50HZ Turgo Turbine Generator,
1000RPM hydro water turbine generator
Produce Electricity Hydraulic Turgo Turbine Generator In Line Hydro Turbine Electric Generator
Main Products Included:
(1) High efficiency Francis water turbine generators series.
(2) High head Pelton water turbine generators series suit.
(3) Vertical shaft device Kaplan water turbine generators series.
(4) Bulb type and Shaft Extension type Tubular water turbine generators series.
(5) Single or double nozzleTurgo water turbine generators series.
Hydro Power Feature:
Hydropower transforms the potential energy of a mass of water flowing in a river or stream with a certain vertical fall (termed the “head”10). The potential annual power generation of a hydropower project is proportional to the head and flow of water. Hydropower plants use a relatively simple concept to convert the energy potential of the flowing water to turn a turbine, which, in turn, provides the mechanical energy required to drive a generator and produce electricity (Figure 2.1). The main components of a conventional hydropower plant are:
» Dam: Most hydropower plants rely on a dam that holds back water, creating a large water reservoir that can be used as storage. There may also be a de-silter to cope with sediment build-up behind the dam.
» Intake, penstock and surge chamber: Gates on the dam open and gravity conducts the water through the penstock (a cavity or pipeline) to the turbine. There is sometimes a head race before the penstock. A surge chamber or tank is used to reduce surges in water pressure that could potentially damage or lead to increased stresses on the turbine.
» Turbine: The water strikes the turbine blades and turns the turbine, which is attached to a generator by a shaft. There is a range of configurations possible with the generator above or next to the turbine. The most common type of turbine for hydropower plants in use today is the Francis Turbine, which allows a side-by-side configuration with the generator.
» Generators: As the turbine blades turn, the rotor inside the generator also turns and electric current is produced as magnets rotate inside the fixed-coil generator to produce alternating current (AC).
Turgo Turbine Generator Parameters:
|Water Head||140m - 250m|
|Flow Rate||0.42 m3/s - 0.52 m3/s|
|Material||Steel plate/Stainless steel|
|Installation method||Horizontal installation / vertical installation|
|Guide vane||Counter Weight|
Turgo Turbine Generator Pictures:
|Low Head High Flow||High Head Low Flow|
|Power 450-1700 KW||Power 1000-5000KW|
|Water Head 6-15 m||Water Head 250-440m|
|Flow Rate 8.4-12.64 m3/s||Flow Rate 0.51-1.14m3/s|
1. Kaplan water turbine generator suitable for water head below 25m. There are fixed oars and rotary oars. The water-passing capacity and hydraulic efficiency of the unit are greatly improved.
2. The hydraulic loss of the passage is reduced and the construction is convenient. Kaplan water turbine generator has high efficiency and its draft tube recovery function can account for more than 40% of the total water head.
3. Kaplan water turbine generator suitable for reversible pump-turbine operation, has good hydraulic performance.
4. Kaplan water tuitable generator for comprehensive development and utilization of low head hydraulic resources.
1.Pelton water turbine generator suitable for high head, small flow and flow changes in large runoff hydro power station;
2. Pelton water turbine generator's power plant investment is small, compact units structure characteristics;
3.Pelton water turbine generator has the efficiency changes smoothly, operating a wide range, even in the 15%-20% load is reduced efficiency;
4. Pelton water turbine generator suitable for high head small flow station in mountain area;
5.A unit construction, simple restrictions without cavitation condition, the advantages of stable operation, less investment, construction area.
We are a manufacturer and distributor of water turbine generators. Founded in 1956, we have a history of 64 years and have our own professional team and factory. Since 2013, we has been engaged in foreign trade and has 7 years of experience.
Inquiry response : Your inquiries will replied in 24 hours.
Delivery time: 45 days to 90days for the small turbine from 20KW to 500KW.
We warmly welcome you visit us and send email to us to inquire our water turbine generator.
Q1, Which water turbine generator should I choose?
Our products are all customized, so please tell me your sepecific parameters: water head, flow rate, frequency, total power, voltage, on grid or off grid operation, we will make a suitable solution for you.
Q2, Can your factory provide all the equipment for turbine generator?
Yes, we can provide you with water turbines, hydro-generators, pressure regulators, water turbine wheels, control panels, transformers, monitoring systems and so on.
Q3, How about your products' quality?
We have a very strict quality controlling system which promises that goods we produced are always of the best quality, and our products have sold in 50 areas abroad. They are very popular with the users there.
Q4, Is your company a trading company or a manufacturer?
We are a manufacturer of water turbine generators and have own factory. We started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.
Q5, What's minimun quantity of an order of your product?
For our all products, our acceptable minimun order is 1 set.
Q6,How to order?
Step 1, Please tell us what model and quantity you need, because our products are all customized;
Step 2, Then we will make a PI for you to confirm the order details;
Step 3, When we confirmed everything,you can arrange the payment;
Step 4, Finally we deliver the goods within the stipulated time.
Q7,How long is the delivery time?
Delivery times range from 30 days to 6 months depending on which water turbine generator you are purchasing, we will deliver the goods as soon as we can.
Q8, After-sales Service?
1 year warranty for all kinds of products. If you find any defective accessories first time, you can contact me, we will give you a best solution, as an experienced manufacturer, you can rest assured of the quality and after-sales service.
Water Turbine generators belong to customized products. We design water turbine generator according to your requirement. Could you give us the following parameters so that we could make a professional solution for your project.
1.Flow rate ( lit/sec or m³/sec?)
2.Water head ( m?)
3.Total power ( KW?)
4.Frequency ( 50 hz or 60 hz?)
5. Voltage( V?)
6. On grid or off grid?
7. Voltage of transmission line if it is on grid( V?)
8. Elevation (MSL)
9. Is it clean fresh water(with our sand, stone and silt ect,.)
By the way,could you tell me your whatsapp number(phone number) ?