|Rated Power:||100kw-300kw||Net Head:||14m-40m|
|Runner Material:||Stainless Steel||Efficiency:||88-95%|
|Keyword:||Francis Turbine Generator||Port:||Shanghai/shenzhen|
water turbine electric generator,
hydro water turbine generator
100kw - 300kw Francis Water Turbine Generator For Hydropower
Our main products included:
1. Kaplan turbine generators series.
2. Turgo turbine generators series.
3. Tubular turbine generators series.
4. Francis turbine generators series.
5. Pelton turbine generators series.
A hydroelectric generator is a generator that converts water energy into electrical energy using a turbine as a prime mover. When the water flows through the turbine, the water energy is converted into mechanical energy, and the rotating shaft of the turbine drives the rotor of the generator to convert the mechanical energy into electrical energy for output. It is the main power equipment for the production of electric energy from hydropower stations.
Francis turbine is one of the most widely used turbines. It has a compact structure, reliable operation and high efficiency range, usually from 85%-95%, and it can be used at different ranges of water flow. Our Francis turbines are commonly used at hydraulic head range of 20-700 meters.
Its special hydraulic characteristics are suitable for high-speed and high-power units.
1,suitable for high head,small flow and flow changes in large runoff hydropower station;
2.With the power plant investment is small,compact units structure characteristics;
3.Has the efficiency changes smoothly,operating a wide range,even in the 15%-20%load is reduced efficiency;
4.Suitable for high head amall flow station in mountain area;
5.A unit construction,simple restrictions without cavitation condition,the advantages of stable ooperation,less investment,construction area.
|HL220-WJ-35 Francis turbine performance data and supporting table|
|Model||Turbine Parameters||Generator Parameters||Driving mode||Speed Way||Water Intake|
|Design head(m)||Under the design head||Design speed (r/min)||The power of generator||Rated speed(r/min)||Vavel control||Guide vane control||Diameter (mm)|
|Flow rate (m3/s)||The output(kw)|
Installation design drawings:
Q1, Which turbine should I choose?
Please tell me the water head, flow rate, frequency, Total power you need
, voltage, on grid or off grid operation, we will propose a solution.
Q2, Can your factory provide all the equipment for hydropower generation?
Yes, we can provide you with turbines, hydro-generators, pressure regulators, turbine wheels, control panels, transformers, monitoring systems and more.
Q3, Can you do EPC for a hydroelectric power plant?
Yes, we can provide TURN-KEY and EPC services including measurement, design, manufacturing, construction, manufacturing, commissioning, inspection, maintenance runner replacement and refurbishment/upgrade/improvement/repair/refurbishment of turbines/generators including bearings, seals For parts and key parts, we will send technicians and workers to install equipment.
Q4,Is your company a trading company or a manufacturer?
We are a manufacturer of hydro turbine generators and started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.
Q5, What is an acceptable MOQ?
For this product, our acceptable MOQ is 1 set.
Q6,How long is the delivery time?
Delivery times range from 15 days to 6 months depending on the model you are purchasing.