|Place of Origin:||Sichuan, China (Mainland)|
|Minimum Order Quantity:||1 Set/Sets|
|Packaging Details:||wood box|
|Payment Terms:||L/C, T/T|
|Supply Ability:||30 Set/Sets per Month|
|Rated Power:||75kw-630kw||Generator Type:||3 Phase AC|
|Water Head(m):||60-220||Rated Voltage:||380v/400V|
|System:||Off Grid,on Grid||Bearing Brand:||SKF,NSK|
|Name:||Turgo Turbine||Keyword:||Micro Hydro Turbine|
micro Hydro Turbine,
630kw Hydro Turbine
Automatic Control Panel Stabilize Cost Turgo Turbine Hydro Generator With CE TUV ISO9001 Certified
The runner blades of the flow turbine are at a certain angle to the axis of the unit, generally at an angle of 15° to 60°. The blades rotate in conjunction with changes in the opening of the vanes, so they are more efficient over a wider operating range. Since the number of runner blades is between the axial flow turbine and the Francis turbine, the application head is also between the two units. It is widely used in power plants with large changes in water head and severe changes in flow rate. It is especially suitable as a reversible unit for pumped storage power stations.
In order to use water resources more effectively, the economics and reliability of power grid supply are improved. Pumped storage power stations have received extensive attention and are developing very rapidly. In recent years, China has also attached great importance to the construction of pumped storage power stations; especially with the construction of atomic power stations and large thermal power stations, pumped storage power stations are more important and indispensable. The diagonal flow pump-turbine has stable running performance and small starting torque; it can be started directly, and it is not necessary to inflate the water into the runner chamber; the reverse thrust is small, so that the phenomenon of lifting the machine during emergency shutdown is better than other units. Particularly suitable for pumped storage power stations.
The components of the crossflow turbine in the prefabricated parts, the water guiding mechanism, the water guiding bearing and the like are basically the same as the corresponding equipment of the Francis turbine. The main difference is in the structure of the runner.
The structure of the diagonal flow turbine runner is shown in Figure 23-1-43. Since the rotor blades are at an angle of 45 to 60 degrees from the axis of the unit, the mechanism for rotating the blades is more complicated than that of the axial-flow rotary turbine. The scraper relay structure is generally adopted in China.
The pressure oil drawn from the oil receiver enters one side of the scraper servo, so that the shaft of the servomotor rotates to drive the operation disc to rotate; the rotor rotates by the rotating arm. In order to adapt to the up and down movement of the oil receiving oil pipe, the rotation of the rotating shaft of the scraper relay drives the cam reversing mechanism to convert the rotation angle of the rotor blade into the vertical movement amount of the operating oil pipe and the oil receiving oil pipe, and the water guiding mechanism Association. Between the blade pivot and the wheel body, the "in" type rubber ring seal is used, and the effect is still good. A good "in" type seal with a life of up to 10 years.
|XJA-W Turgo turbine generator unit||Generator||Unit output (kw)||Gevernor or Regulating work||Valve (mm)|
|Type||Water head(m)||Discharge (m³/s)||Output(kw)||Speed (r/min)||Type||Capacity|
|XJA-W-50/1 x8||60||0.166||76.2||600||SFW75-10/560||75||67||Manual CJT-I||350|
|XJA - W-50/1 x10||60||0.259||124.1||600||SFW125-10/650||125||111.6||Manual CJT-I or CJWT- I||350|
|XJA-W-50/1 x13||80||0.505||327.4||750||SFW320-8/850||320||299.2||Manual CJT-I or CJWT- I||350|
|XJA-W-56/1 x 11||140||0.478||529.8||750||SFW500-8/990||500||492.7||Manual CJT-I or CJWT- I||400|
|XJA - W-56/1*14||70||0.546||311.9||SFW320-10/850||320||320||Manual CJT-I||400|
Q1, Which turbine should I choose?
Please tell me the water head, flow rate, frequency, Total power you need
, voltage, on grid or off grid operation, we will propose a solution.
Q2, Can your factory provide all the equipment for hydropower generation?
Yes, we can provide you with turbines, hydro-generators, pressure regulators, turbine wheels, control panels, transformers, monitoring systems and more.
Q3, Can you do EPC for a hydroelectric power plant?
Yes, we can provide TURN-KEY and EPC services including measurement, design, manufacturing, construction, manufacturing, commissioning, inspection, maintenance runner replacement and refurbishment/upgrade/improvement/repair/refurbishment of turbines/generators including bearings, seals For parts and key parts, we will send technicians and workers to install equipment.
Q4,Is your company a trading company or a manufacturer?
We are a manufacturer of hydro turbine generators and started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.
Q5, What is an acceptable MOQ?
For this product, our acceptable MOQ is 1 set.
Q6,How long is the delivery time?
Delivery times range from 15 days to 6 months depending on the model you are purchasing.
Q7,Does your company have its own independent official website?
Of course, and we can see more information about our company and products on our official website.
website address: www.fstgenerator.com