|Type:||Hydro Turgo Turbine Generator||Application:||Hydro Power Plant|
|Water Head(m):||110||Flow Rate(m3/s):||0.35|
|Material:||Stainless Steel Runner||Certificate:||IS09001/CE/TUV|
|Generator Type:||Brush-less Excitation||Keyword:||Turbine Generator|
turgo hydro generator,
turgo water turbine
China Manufacturer Design High Water Head Hydro Turgo Turbine Generator For Water Power Plant
Our main products included:
1. Kaplan turbine generators series.
2. Turgo turbine generators series.
3. Tubular turbine generators series.
4. Francis turbine generators series.
5. Pelton turbine generators series.
The main components of the Turgo turbine are similar to those of the water bucket. There are also nozzles and working wheels with water buckets. The different places have the following points:
Nozzle is placed in the same plane as the working wheel, and at an angle to the plane, the angle is called the oblique angle.
The water bucket is scoop-shaped, the jet flows from one side of the water bucket and flows out from the other side, and has an axial force.
The outer circle of the water bucket has an outer ring, which increases the strength of the blade and reduces part of the windage loss.
The slanting turbine has a unique application range. In the range of N = 30~70, the Francis turbine is not suitable. The single nozzle hopper can not reach the specific speed, and the double-click turbine is too low.
In addition to the close relationship between the head size and the flow rate, the turbine output power is also related to the efficiency of the turbine. In the process of converting the energy of the water into mechanical energy, the flow and the head are depleted, and the flow of water in the flow of the runner has impact and friction loss, so that the output mechanical energy of the turbine is less than the water energy. The ratio of the output power of the turbine shaft to the water energy (power) of the input turbine is called the efficiency of the turbine.
|XJA-W Turgo tubine generator unit||Generator||Unit output (kw)||Gevernor or Regulating work||Valve (mm)|
|Type||Water head(m)||Discharge (m³/s)||Output(kw)||Speed (r/min)||Type||Capacity|
|XJA-W-70/1*16.5||125||1.013||982.6||750||SFW1000-8/1180||1000||914||CJWT- 1 BWT-6000||DN600 P=25kg/cm2|
|XJA-W-80/1x18||100||1.09||883.2||500||SFW800-12/1730||800||795||CJWT- 1 BWT-6000||600|
|XJA-W-80/1x20||100||1.338||1093.4||500||SFW1000-12/1730||1000||962||CJWT- I BWT-6000||600|
Q1, Which turbine should I choose?
Please tell me the water head, flow rate, frequency, Total power you need
, voltage, on grid or off grid operation, we will propose a solution.
Q2, Can your factory provide all the equipment for hydropower generation?
Yes, we can provide you with turbines, hydro-generators, pressure regulators, turbine wheels, control panels, transformers, monitoring systems and more.
Q3, Can you do EPC for a hydroelectric power plant?
Yes, we can provide TURN-KEY and EPC services including measurement, design, manufacturing, construction, manufacturing, commissioning, inspection, maintenance runner replacement and refurbishment/upgrade/improvement/repair/refurbishment of turbines/generators including bearings, seals For parts and key parts, we will send technicians and workers to install equipment.
Q4,Is your company a trading company or a manufacturer?
We are a manufacturer of hydro turbine generators and started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.
Q5, What is an acceptable MOQ?
For this product, our acceptable MOQ is 1 set.
Q6,How long is the delivery time?
Delivery times range from 15 days to 6 months depending on the model you are purchasing.
Q7,Does your company have its own independent official website?
Of course, and we can see more information about our company and products on our official website.
website address: www.fstgenerator.com