|Place of Origin:||Sichuan, China (Mainland)|
|Minimum Order Quantity:||1 Set/Sets|
|Packaging Details:||Wood box|
|Payment Terms:||L/C, T/T|
|Supply Ability:||50 Set/Sets per Month|
|Capacity:||300kw-1000kw||Voltage:||380v Or 400v Or 6300v|
|Frequency:||50Hz/60Hz||Generator Type:||Brushless Excitation|
|Power Factor:||Cos 0.8lag||Governor:||High Hydraulic Microcomputer Governor|
|Runner Material:||Stainless Steel||Keyword:||Kaplan Turbine|
|Insulation Class:||F/F||Installation Method:||Vertical Installation|
|Control Panel:||5 In 1 Integrated Control Panel|
kaplan turbine for hydroelectric generator,
kaplan hydro turbine generator
Low Head 1000kw Kaplan Turbine for Hydroelectric Generator
Kaplan turbine is divided into two types: kaplan turbine fixed paddle type and Kaplan paddle type. Kaplan turbine is used to develop water resources with lower head and larger flow. Its specific speed is greater than that of the francis turbine, which belongs to the high specific speed turbine. Under the condition of low head, axial flow turbine and francis turbine have more obvious advantages, when they use head and output at the same time, axial flow turbine due to the large flow capacity, can use a smaller runner diameter and higher speed, thus reducing the size of the unit, reduce the investment. When both have the same diameter and are used at the same head, axial turbines can deliver more efficiency. In particular, axial flow propeller turbine, because the runner blade and guide blade with the change of working conditions form an optimal co-relation, improve the average efficiency of the turbine, expand the operating range, and obtain stable operating characteristics, is worth widely used as a type.
|ZD-LM(Y)-Kaplan turbine generator unit||Generator||Gevernor or Regulating work|
|Type||Blade angle(°)||Water head(m)||Discharge (m³/s)||Speed (r/min)||Power(kw)||Efficiency(%)|
|ZD560a-LH-120||5||8.1||5.2||375||360||87.2||SF320-16/1430||DST-6000 or YT-6000|
|10.3||6.17||428.6||561||87.1||SF500-14/1430||YT-6000 or DST-6000|
|+ 15°||8.5||6.3||300||449||85.5||SF400-20/1730||YT-6000 or DST-6000|
Pelton Turbine Design Schematic:
Q1, Which hydro turbine should I choose?
Please tell me the water head, flow rate, frequency, Total power you need
, voltage, on grid or off grid operation, we will propose a solution.
Q2, Can your factory provide all the equipment for hydropower generation?
Yes, we can provide you with turbines, hydro-generators, pressure regulators, turbine wheels, control panels, transformers, monitoring systems and more.
Q3, Can you do EPC for a hydroelectric power plant?
Yes, we can provide TURN-KEY and EPC services including measurement, design, manufacturing, construction, manufacturing, commissioning, inspection, maintenance runner replacement and refurbishment/upgrade/improvement/repair/refurbishment of turbines/generators including bearings, seals For parts and key parts, we will send technicians and workers to install equipment.
Q4, Is your company a trading company or a manufacturer?
We are a manufacturer of hydro turbine generators and started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.
Q5, How many an acceptable MOQ?
For this product, our acceptable MOQ is 1 set.
Q6, How long is the delivery time?
Delivery times range from 15 days to 6 months depending on the model you are purchasing.