|Product Name:||Francis Turine Generator||Generator Type:||Brushless|
|Rated Power:||200kw||Flow Rate:||1.67m3/s|
|Material:||Stainless Steel Blades||Certificate:||ISO9001/CE/TUV|
|Diameter(mm):||500||Keyword:||Francis Water Turbine|
small francis turbine,
francis water turbine
Quick Delivery Hot Sale Horizontal Francis Turbina Generator For Hydropower Plant
Our main products included:
(1) Low head kaplan turbine generators series.
(2) Middle high head Turgo turbine generators series,e.g. vertical type horizontal type.
(3) Low head Tubular turbine generators series ,e.g. Bulb type and shaft extension type.
(4) Medium headFrancis turbine generators series.
(5) High head turbine generators series and double turbine generators series and so on.
Product features :
It is a kind of counter-attack turbine, invented by American engineer Francis in 1849, also known as Francis turbine, or radial flow turbine. Water flows into the runner from all sides radially, and then flows out from the runner in an approximate axial direction. The runner is composed of upper crown, lower ring and blade . In recent years, the development trend is high head, large capacity, high specific speed and high efficiency.
1.Francis turbine has the advantages of compact structure, high efficiency and can adapt to a wide range of water head of turbine type.
2.When the water flow through the turbine wheel, it enters to radial, axial flow, so it is also called the radial axial flow turbine;
3.Francis turbine is also called the Francis turbine. The water flow from the surrounding radial inflow runner, then approximate axial flow runner, runner by the crown, under the ring and the blade;
4.It is applicable to the head from a range of 20 meters of up to 700 meters, has the advantages of simple structure, stable operation, and high efficiency, but it is generally used in the head in the range(50 to 400 meters). Single output from tens of KW to several 101000 tile. At present this kind of turbine maximum output has exceeded 700000 kilowatts. A turbine is one of the most extensively used.
Installation design drawings:
Q1, Which turbine should I choose?
Please tell me the water head, flow rate, frequency, Total power you need
, voltage, on grid or off grid operation, we will propose a solution.
Q2, Can your factory provide all the equipment for hydropower generation?
Yes, we can provide you with turbines, hydro-generators, pressure regulators, turbine wheels, control panels, transformers, monitoring systems and more.
Q3, Can you do EPC for a hydroelectric power plant?
Yes, we can provide TURN-KEY and EPC services including measurement, design, manufacturing, construction, manufacturing, commissioning, inspection, maintenance runner replacement and refurbishment/upgrade/improvement/repair/refurbishment of turbines/generators including bearings, seals For parts and key parts, we will send technicians and workers to install equipment.
Q4,Is your company a trading company or a manufacturer?
We are a manufacturer of hydro turbine generators and started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.
Q5, What is an acceptable MOQ?
For this product, our acceptable MOQ is 1 set.
Q6,How long is the delivery time?
Delivery times range from 15 days to 6 months depending on the model you are purchasing.