|Application:||Hydro Power Plant||Certificate:||IS09001/CE/TUV|
|Material:||Stainless Steel Blades||Rated Speed(r/min):||600|
|Water Head(m):||11-30||Flow Rate(m3/s):||1.27-11.31|
francis hydro turbine,
francis water turbine
Stainless Steel Brushless Motor Hydro Francis Turbine Generator For Hpp
Our main products included:
1. Kaplan turbine generators series.
2. Turgo turbine generators series,e.g. vertical type horizontal type.
3. Tubular turbine generators series ,e.g. Bulb type and shaft extension type.
4. Francis turbine generators series.
5. Pelton turbine generators series and double turbine generators series and so on.
Product features :
1.Francis turbine has the advantages of compact structure, high efficiency and can adapt to a wide range of water head of turbine type.
2.When the water flow through the turbine wheel, it enters to radial, axial flow, so it is also called the radial axial flow turbine;
3.Francis turbine is also called the Francis turbine. The water flow from the surrounding radial inflow runner, then approximate axial flow runner, runner by the crown, under the ring and the blade;
4.It is applicable to the head from a range of 20 meters of up to 700 meters, has the advantages of simple structure, stable operation, and high efficiency, but it is generally used in the head in the range(50 to 400 meters). Single output from tens of KW to several 101000 tile. At present this kind of turbine maximum output has exceeded 700000 kilowatts. A turbine is one of the most extensively used.
5.The Francis turbine is compact and efficient, and can adapt to a wide range of water heads. It is one of the most widely used turbine types in the world. When water flows through such a turbine wheel, it enters in a radial direction and flows out axially, so it is also called a radial axial flow turbine.
|HL-WJ-Francis tubine generator unit||Generator||Gevernor or Regulating work||Valve|
|Type||Water head(m)||Discharge (m³/s)||Speed (r/min)||Power(kw)||Efficiency(%)|
|HL240C-L(W)J-100||20||6.48||300||1106.9||87||SF1000-20/2150||YT-10000 Or YWT-10000 YWT18000||PDF6-WYDg1250|
Q1, Which turbine should I choose?
Please tell me the water head, flow rate, frequency, Total power you need
, voltage, on grid or off grid operation, we will propose a solution.
Q2, Can your factory provide all the equipment for hydropower generation?
Yes, we can provide you with turbines, hydro-generators, pressure regulators, turbine wheels, control panels, transformers, monitoring systems and more.
Q3, Can you do EPC for a hydroelectric power plant?
Yes, we can provide TURN-KEY and EPC services including measurement, design, manufacturing, construction, manufacturing, commissioning, inspection, maintenance runner replacement and refurbishment/upgrade/improvement/repair/refurbishment of turbines/generators including bearings, seals For parts and key parts, we will send technicians and workers to install equipment.
Q4,Is your company a trading company or a manufacturer?
We are a manufacturer of hydro turbine generators and started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.
Q5, What is an acceptable MOQ?
For this product, our acceptable MOQ is 1 set.
Q6,How long is the delivery time?
Delivery times range from 15 days to 6 months depending on the model you are purchasing.
Q7,What is your manufacturing process?
DL443-91 General requirements for factory inspection of hydro turbine generator units;
GB755-87 basic technical requirements for rotating electrical machines;
Technical specification for SD295-88 hydraulic fluid electro-hydraulic regulating system and device;
GB/T9652-1997 Technical requirements for turbine governors and hydraulic devices;
SD152-87 Basic technical conditions for large and medium-sized hydroelectric generators;
GB/T10969-1996 Technical requirements for turbine flow passage components;
GB/T14478-93 Basic technical conditions for inlet valves for large and medium-sized turbines;
GB/T13384-92 General technical requirements for mechanical and electrical product packaging
GB150-89 steel pressure vessel
GB/T12237-2007 Steel ball valve for petroleum, petrochemical and related industries
GB/T12229-2005 general valve carbon steel casting technical conditions