|Place of Origin:||Sichuan, China (Mainland)|
|Minimum Order Quantity:||1 Set/Sets|
|Packaging Details:||Wooden box|
|Payment Terms:||L/C, D/A, T/T, D/P, Western Union, MoneyGram|
|Supply Ability:||50 Set/Sets per Month|
|Design Head:||60m To 220m||Design Flow:||0.166 M3/s To 0.714 M3/s|
|Generator:||3-phase Alternator||Processing Method:||CNC Machining|
|Volute Material:||Carbon Steel||Runner Material:||Stainless Steel|
|Connection Method:||Straight League||Valve:||Butterfly Valve|
turgo hydro generator,
hydroelectric power plant generator
Vortex Hydro Turbine Turgo Water Powered Generator Price With Stainless Runner
The Turgo turbine is an impulse turbine, and can handle flow rates that are higher than those a Pelton turbine can handle. This ability to deal better with large volumes of water gives the Turgo turbine an advantage when used in hydroelectric plants that have medium hydraulic heads. Although they are better able to deal with high flow rates, Turgo turbines are slightly less efficient.
Since the runners on these turbines are smaller and faster spinning, some Turgo turbines can be connected directly to a generator instead of having to use a speed-increasing transmission.
In a Turgo, the runner is less expensive to make than a Pelton Wheel and does not need an airtight housing like the Francis. It also has a higher specific speed, handling a greater flow than the Pelton Wheel. This leads to a reduced generator and installation cost. Turgos operate in a head range where the Francis and Pelton overlap.
When water flows from the pressure foray into the turbine nozzle through pipe, its potential energy is converted to kinetic energy by the nozzle. The high speed water jet comes out from the nozzle strikes at the buckets (blades) at a certain angle (not in a tangential direction) against the rotating surface of the runner. The water flows into the propeller (turbine runner) from one side and flows out from other side.
Water Turgo Turbine Generator Product parameters
|XJA-W Turgo tubine generator unit||Generator||Unit output (kw)|
|Type||Water head(m)||Discharge (m³/s)||Output(kw)||Speed (r/min)||Type||Capacity|
|XJA - W-50/1 x10||60||0.259||124.1||600||SFW125-10/650||125||111.6|
|XJA-W-56/1 x 11||140||0.478||529.8||750||SFW500-8/990||500||492.7|
|XJA - W-56/1*14||70||0.546||311.9||SFW320-10/850||320||320|
Chengdu Forster Technology is focused on design and manufacturing hydro turbines. The company was founded in 1956. Forster is the first Chinese state-owned enterprise and spares no effort to expand international market in 2013,At present, we have obtained orders in many water-rich areas such as Europe, Asia, South America, North America, etc., and as partners, we are qualified as long-term suppliers in many regions.
The capacity of hydro turbines is up to 5KW-300MW for a unit. The main hydro turbines are Turgo turbine ,pelton turbines, francis turbines, kaplan turbines ,bulb tubular turbines and other types of turbines.Foster also supplies governors, valves, transformers, monitoring systems, microcomputer integrated control panels and other equipment for hydroelectric power plants.
Q1, Which turbine should I choose?
Please tell me the water head, flow rate, frequency, Total power you need
, voltage, on grid or off grid operation, we will propose a solution.
Q2, Can your factory provide all the equipment for hydropower generation?
Yes, we can provide you with turbines, hydro-generators, pressure regulators, turbine wheels, control panels, transformers, monitoring systems and more.
Q3, Can you do EPC for a hydroelectric power plant?
Yes, we can provide TURN-KEY and EPC services including measurement, design, manufacturing, construction, manufacturing, commissioning, inspection, maintenance runner replacement and refurbishment/upgrade/improvement/repair/refurbishment of turbines/generators including bearings, seals For parts and key parts, we will send technicians and workers to install equipment.
Q4, Is your company a trading company or a manufacturer?
We are a manufacturer of hydro turbine generators and started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.
Q5, How many an acceptable MOQ?
For this product, our acceptable MOQ is 1 set.
Q6, How long is the delivery time?
Delivery times range from 15 days to 6 months depending on the model you are purchasing.
Q7, Does your company have its own independent official website?
Of course, and we can see more information about our company and products on our official website.
website address: www.fstgenerator.com