|Insulation Grade:||F/F||Bearing Brand:||Japan NSK|
|Control System:||5 In 1 Integrated Control Panel||Valve:||Butterfly Valve / Gate Valve|
|Efficiency:||93-97.5%||Keyword:||Water Turbine Generator Hydro Power Plant|
hydro power generator water turbine,
97.5% hydro turbine generator
Excitation Control Screen Gate Valve Hydraulic Governor Transformers Water Turbine Generator Hydro Power Plant
Our main products included
1. Kaplan turbine generators series.
2. Turgo turbine generators series.
3. Tubular turbine generators series.
4. Francis turbine generators series.
5. Pelton turbine generators series .
Water Turbine Generator Hydro Power Plant Product features
Hydroelectric generator is a generator that converts water energy into electrical energy using a turbine as a prime mover. When the water flows through the turbine, the water energy is converted into mechanical energy, and the rotating shaft of the turbine drives the rotor of the generator to convert the mechanical energy into electrical energy for output. It is the main power equipment for the production of electric energy from hydropower stations.
Francis turbine generator unit is one of our common turbines. It consists of turbines, generators, automatic control systems, governors, valves, transformers and so on. Most of the turbines are installed in hydropower stations to drive generators to generate electricity. In the hydropower station, the water in the upstream reservoir is led to the turbine through the water conduit, pushing the turbine runner to rotate and driving the generator to generate electricity. The finished water is drained downstream through the tailpipe. The higher the head and the greater the flow, the greater the output power of the turbine.
The recent development trend of Francis turbines is high head, large capacity, high efficiency, and its head adapts to medium and high heads and is used by more hydropower stations. It is currently widely used in the world.
The main features
1.Francis turbine has the advantages of compact structure, high efficiency and can adapt to a wide range of water head of turbine type.
2.When the water flow through the turbine wheel, it enters to radial, axial flow, so it is also called the radial axial flow turbine;
3.Francis turbine is also called the Francis turbine. The water flow from the surrounding radial inflow runner, then approximate axial flow runner, runner by the crown, under the ring and the blade;
4.It is applicable to the head from a range of 20 meters of up to 700 meters, has the advantages of simple structure, stable operation, and high efficiency, but it is generally used in the head in the range(50 to 400 meters). Single output from tens of KW to several 101000 tile. At present this kind of turbine maximum output has exceeded 700000 kilowatts. A turbine is one of the most extensively used.
|HL-WJ-Francis turbine generator unit||Generator||Gevernor or Regulating work||Valve|
|Type||Water head(m)||Discharge (m³/s)||Speed (r/min)||Power(kw)||Efficiency(%)|
|HL260 C-WJ-50||11||1.27||500||118.9||86||SFW100-12/740||YT-3000||Z941H-6 DN800|
|HL260 C-WJ-71||10.4||2.48||375||224||88.3||SFW200-16/850||YT-3000||PDF6-WD DN1000|
Q1, Which turbine should I choose?
Please tell me the water head, flow rate, frequency, Total power you need
, voltage, on grid or off grid operation, we will propose a solution.
Q2, Can your factory provide all the equipment for hydropower generation?
Yes, we can provide you with turbines, hydro-generators, pressure regulators, turbine wheels, control panels, transformers, monitoring systems and more.
Q3, Can you do EPC for a hydroelectric power plant?
Yes, we can provide TURN-KEY and EPC services including measurement, design, manufacturing, construction, manufacturing, commissioning, inspection, maintenance runner replacement and refurbishment/upgrade/improvement/repair/refurbishment of turbines/generators including bearings, seals For parts and key parts, we will send technicians and workers to install equipment.
Q4,Is your company a trading company or a manufacturer?
We are a manufacturer of hydro turbine generators and started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.
Q5, What is an acceptable MOQ?
For this product, our acceptable MOQ is 1 set.
Q6,How long is the delivery time?
Delivery times range from 15 days to 6 months depending on the model you are purchasing.
Q7,Does your company have its own independent official website?
Of course, and we can see more information about our company and products on our official website.