|Processing Method:||CNC Machining / Constant Temperature Annealing||Design Head:||125m To 300m|
|Design Flow:||1.013 M³/s To 1.84 M³/s||Installation Method:||Vertical Installation|
|Power:||900 KW To 2600 KW||Generator Type:||Synchronous Alternator, AC|
|Grid System:||On Grid/off Grid||Generator::||3-phase Alternator|
|Excitation Device:||5 In 1 Integrated Control Panel||Runner Material:||Stainless Steel|
2600 KW Turgo Turbine Generator,
900kj turgo generator
Long Service Life Water Wheel Hydro Electric Turgo Turbine Generator
A type of impact turbine. It is mainly composed of nozzle and runner. The runner is composed of an outer rim, an inner hub and several single bowl-shaped bucket leaves fixed in between. The jet from the nozzle obliquely strikes the blades on the front of the runner at an angle of 22.5° and flows out from the back. The structure is simple, the cost is low, but the efficiency is low. Only applies to small power stations. The applicable head is 30m to 300 m.
Horizontal unit has the advantages of simple structure,convenient repair,reduce the plant height,advantages in reducing excavation depth.
The vertical unit with plant plane size small,a runner can be provided with a plurality of nozzles,(at most can be installed six nozzles),high specific speed,the same size as units of capacity is relatively small,light weight and so on.
When water flows from the pressure foray into the turbine nozzle through pipe, its potential energy is converted to kinetic energy by the nozzle. The high speed water jet comes out from the nozzle strikes at the buckets (blades) at a certain angle (not in a tangential direction) against the rotating surface of the runner. The water flows into the propeller (turbine runner) from one side and flows out from other side.
In a Turgo, the runner is less expensive to make than a Pelton Wheel and does not need an airtight housing like the Francis. It also has a higher specific speed, handling a greater flow than the Pelton Wheel. This leads to a reduced generator and installation cost. Turgos operate in a head range where the Francis and Pelton overlap.
|XJA-W Turgo tubine generator unit||Generator||Unit output (kw)||Gevernor or Regulating work||Valve (mm)|
|Type||Water head(m)||Discharge (m³/s)||Output(kw)||Speed (r/min)||Type||Capacity|
|XJA-W-70/1*16.5||125||1.013||982.6||750||SFW1000-8/1180||1000||914||CJWT- 1 BWT-6000||DN600 P=25kg/cm2|
|XJA-W-80/1x18||100||1.09||883.2||500||SFW800-12/1730||800||795||CJWT- 1 BWT-6000||600|
|XJA-W-80/1x20||100||1.338||1093.4||500||SFW1000-12/1730||1000||962||CJWT- I BWT-6000||600|
Forster always provides technical advice, services and the best technical solutions to customers based on their parameters. At the same time, it keeps offering after sale service for our product.
We always adhere to the principle of honesty and pragmatism, quality first, will be broad-minded, the attitude of life into our work, and strive to create a win-win situation for customers, enterprises and society. In the fierce market competition, we have always adhered to the details of success or failure, focusing on the achievement of excellence in the spirit of enterprise. In the friendly cooperation with customers at home and abroad, we have been pursuing the business philosophy of creating maximum value for customers.
Q1, Which turbine should I choose?
Please tell me the water head, flow rate, frequency, Total power you need
, voltage, on grid or off grid operation, we will propose a solution.
Q2, Can your factory provide all the equipment for hydropower generation?
Yes, we can provide you with turbines, hydro-generators, pressure regulators, turbine wheels, control panels, transformers, monitoring systems and more.
Q3, Can you do EPC for a hydroelectric power plant?
Yes, we can provide TURN-KEY and EPC services including measurement, design, manufacturing, construction, manufacturing, commissioning, inspection, maintenance runner replacement and refurbishment/upgrade/improvement/repair/refurbishment of turbines/generators including bearings, seals For parts and key parts, we will send technicians and workers to install equipment.
Q4,Is your company a trading company or a manufacturer?
We are a manufacturer of hydro turbine generators and started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.
Q5, What is an acceptable MOQ?
For this product, our acceptable MOQ is 1 set.
Q6,How long is the delivery time?
Delivery times range from 15 days to 6 months depending on the model you are purchasing.
Q7,Does your company have its own independent official website?
Of course, and we can see more information about our company and products on our official website.
website address: www.fstgenerator.com