|Place of Origin:||Sichuan province,China|
|Minimum Order Quantity:||1 set|
|Packaging Details:||Wooden box|
|Payment Terms:||L/C, D/A, D/P, Western Union, MoneyGram|
|Supply Ability:||500 Set/Sets per month|
|Design Head:||60m To 190m||Flow:||0.16 To 0.64 Cubic Meter|
|Runner Material:||Stainless Steel||Excitation Device:||5 In 1 Integrated Control Panel|
|Governor:||High Hydraulic Microcomputer Governor|
turgo hydro generator,
hydroelectric power plant generator
100KW To 700 KW Turgo Type Deriaz Turbine Generator With Governor
Our main products included:
1. Kaplan turbine generators series.
2. Turgo turbine generators series.
3. Tubular turbine generators series.
4. Francis turbine generators series.
5. Pelton turbine generators series.
The turgo hydraulic generator is composed of a manual speed regulating valve (some are needles), a nozzle, a runner, a casing, a bearing and a shaft seal.
The nozzle direction of the turbulent turbine is at an angle (typically 22.5°) to the plane of rotation of the runner, and the jet impinges on the impeller obliquely.The nozzle is mounted behind the pressure water pipe manual speed control valve. The nozzle is a conical tube. As the cross-sectional area of the conical tube becomes smaller, the water flow gradually accelerates, forming a high-speed jet at the nozzle outlet, and impacting the rotor.
In order to adjust the flow rate and control the output of the unit, the unit operates well and has high efficiency. Some micro-units are regulated with gate valves.
The runner is the heart of the turbine. The larger capacity of the slanting runner has complex blades and a streamlined section (such as the airfoil of the aircraft). The manufacturing process requires high requirements. For the miniature slanting wheel, in order to simplify the production process and reduce the cost, a hemispherical blade is formed. The blades of the runner are stamped out on a punch with a steel plate with a thickness of 2 mm and trimmed by trimming. An impeller generally consists of 18 to 22 blades. The blade is assembled and welded to form a runner, and the entire manufacturing process is simple.
1.Horizontal unit has the advantages of simple structure,convenient repair,reduce the plant height,advantages in reducing excavation depth.
2.The vertical unit with plant plane size small,a runner can be provided with a plurality of nozzles,(at most can be installed six nozzles),high specific speed,the same size as units of capacity is relatively small,light weight and so on.
|XJA-W Turgo Type Deriaz Turbine Generator Unit||Generator||Unit output (kw)||Gevernor or Regulating work||Valve (mm)|
|Type||Water head(m)||Discharge (m³/s)||Output(kw)||Speed (r/min)||Type||Capacity|
|XJA-W-50/1 x8||60||0.166||76.2||600||SFW75-10/560||75||67||Manual CJT-I||350|
|XJA - W-50/1 x10||60||0.259||124.1||600||SFW125-10/650||125||111.6||Manual CJT-I or CJWT- I||350|
|XJA-W-50/1 x13||80||0.505||327.4||750||SFW320-8/850||320||299.2||Manual CJT-I or CJWT- I||350|
Chengdu Forster Technology is focused on design and manufacturing hydro turbines. The company was founded in 1956. Forster is the first Chinese state-owned enterprise and spares no effort to expand international market in 2013,At present, we have obtained orders in many water-rich areas such as Europe, Asia, South America, North America, etc., and as partners, we are qualified as long-term suppliers in many regions.
The capacity of hydro turbines is up to 50KW-30MW for a unit. The main hydro turbines areTurgo turbine ,pelton turbines, francis turbines, kaplan turbines ,bulb tubular turbines and other types of turbines.Foster also supplies governors, valves, transformers, monitoring systems, microcomputer integrated control panels and other equipment for hydroelectric power plants.
Q1, Which turbine should I choose?
Please tell me the water head, flow rate, frequency, Total power you need
, voltage, on grid or off grid operation, we will propose a solution.
Q2, Can your factory provide all the equipment for hydropower generation?
Yes, we can provide you with turbines, hydro-generators, pressure regulators, turbine wheels, control panels, transformers, monitoring systems and more.
Q3, Can you do EPC for a hydroelectric power plant?
Yes, we can provide TURN-KEY and EPC services including measurement, design, manufacturing, construction, manufacturing, commissioning, inspection, maintenance runner replacement and refurbishment/upgrade/improvement/repair/refurbishment of turbines/generators including bearings, seals For parts and key parts, we will send technicians and workers to install equipment.
Q4,Is your company a trading company or a manufacturer?
We are a manufacturer of hydro turbine generators and started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.
Q5, What is an acceptable MOQ?
For this product, our acceptable MOQ is 1 set.
Q6,How long is the delivery time?
Delivery times range from 15 days to 6 months depending on the model you are purchasing.
Q7,Does your company have its own independent official website?
Of course, and we can see more information about our company and products on our official website.
website address: www.fstgenerator.com